Main index

 

Hold Curser Over Button For Contents

BRAKE PADS   MASTER CYLINDERS   RESERVOIRS   FLUIDS   AP CALIPERS   CALIPER REBUILD SEALS AP  BREMBO  ATE  GIRLING    BRAKE PEDAL BIAS CABLES

SAFETY HARNESS   KONI DAMPERS   SFI BAR PADDING   FUEL CELLS   MIRRORS   STEERING WHEEL HUBS   BEAD SEATING

PUSH-PULL CABLES   TENSION (THROTTLE) CABLES   BODY MOUNT CABLES

OIL COOLERS   CUSTOM RADIATORS   COOLANT HOSE/CLAMPS

AP RACING CLUTCH   HEWLAND GEARBOX   WHEEL BEARINGS   CV JOINTS   MIL-SPEC U-JOINTS

 

BELL HELMETS   HANS DEVICE   RACING UNIFORMS   MALE & FEMALE RACING UNIFORMS   MALE & FEMALE RACING UNDERGARMENTS    RACING GLOVES    RACING SHOES

RACING BATTERIES   LED WARNING INDICATORS   MASTER AND TOGGLE SWITCHES     BOSCH IGNITION      WIRE CONNECTORS     THIN WALL ELECTRICAL WIRE     CRIMPING TOOL

AN FASTENERS   JET NUTS   JAM NUTS   TY-RAPS   TERRY SPRINGS   CAPTIVE HOOD PINS   CAPTIVE WASHERS

RED LINE SYNTHETIC PRODUCTS

BELL HELMET ACCESSORIES   WEBER CARBURETORS   WEBER AIR FILTERS   CIRCUIT WORKERS SAFETY CUSTOM ALLOY WINGS

 

EARL'S PERFORMANCE BRAKE, FUEL, OIL HOSE   HOSE-END FITTINGS   HOSE ADAPTERS   WELD-ON FITTINGS   FLAME GUARD HOSE INSULATION   HEAT CLOTH

AURORA ROD-END AND SPHERICAL BEARING   MIL-SPEC U-JOINTS   WHEEL BEARINGS

SERVICES WE CAN PERFORM FOR YOU

SAFETY KLEEN PRODUCTS   HYLOMAR   COPASLIP   AUTOSOL   TIRE GAUGES   WIRE PLIERS   CLECO'S   PYROMETERS   DZUS TOOLS   ALLOY HOSE WRENCH   ROBIC WATCHES

PANASPORT ALLOY RACE STREET WHEELS

 

New Stuff

OUR CONTACT INFORMATION

Up ] Products ] Services ] Hours&Location ] Contact Us ] Search ] Links ]

 

3 ply silicone coolant hose for high pressure racing applications

Three Ply Silicone Coolant Hose

Polyester Fabric Reinforced Resistant to Coolant Additives
Continuous Operating Temperatures; -650F to +350 0F

 

Straight Hose in three foot length

Part Number

ID
   Inch  

ID
  mm  

OD
   Inch  

OD
  mm  

Burst
Pressure
PSI

Weight
Lb / ft

1Y2567

1

25

1.32

35

300

0.32

1Y2588

1-1/8

29

1.45

39

300

0.36

1Y2587

1-1/4

32

1.57

42

275

0.40

1Y2593

1-3/8

35

1.70

45

275

0.44

1Y2791

1-1/2 38 1.82 48 250 0.48

Contact us about sizes greater or less than those listed.

 

coolant lined hose clamps for silicone and other soft materials

 

Lined Hose Clamp

 

 

Lined clamps are specifically designed for use with silicone rubber and other
soft hose applications. The liner protects the hose surface and prevents
extruding or shearing as the band is tightened. 1/2 inch wide
Order by hose OD.
Our most popular sizes are;

#16     11/16" to 1-1/2"      part #1Y0777
#20       1" to 1-3/4"           part #1Y1619
#28     1-5/16" to 2-1/4"     part #1Y0223

 

 

 

aluminum radiator cap housingBillet Aluminum Radiator Cap Housing
for custom filler neck, swirl tank or radiator fabrication
Part# 5C2605

 

 

 

 

 

© Copyright 2020 Averill Racing Stuff, Inc.
Madison Heights Michigan
Phone 248-585-9139  Fax 248-585-9242